Description

Castrol Tribol™ MWO LS way oils are used for the lubrication of machine tool slides and ways. Tribol MWO 20LS and

40LS are ISO Viscosity Grades 68 and 220, respectively. These unique way oils are intended for use where solid

lubricants cannot be used for cosmetic or other reasons. Tribol MWO LS way oils offer excellent thin-film wear

protection due to a proprietary blend of anti-wear, extreme pressure (EP) and friction-modifying agents which perform

synergistically in combination. When subjected to the extreme pressure of contacting asperties these additives convert to

low-shear compounds on working surfaces, lubricating much like solid-film lubricants. Because the additives in Tribol

MWO LS way oils are fully dissolved but act like solid lubricants in service, the products are designated "LS" for "Liquid

Solids." The high quality base oils in Tribol MWO LS way oils are selected for their ability to maintain strong film integrity

even under great stress. Additional compounding with select polymers adds both adhesive and cohesive characteristics

to these products. Tribol MWO LS way oils are not corrosive to ferrous or non-ferrous metals and rust and oxidation

inhibiting characteristics are maximised to afford effective rust protection and long life of the oil. Tribol MWO LS way oils

are "low phenol" products, typically containing less than 2 ppm of phenolic compounds.

Application

Tribol MWO LS way oils are recommended where the use of lubricating solids may be restricted due to manufacturer's

requirements, very fine filtration, or concerns about solids contaminating the manufacturing process. They are also

suitable for lubricating many components of machine tools, including slides and ways, plain and antifriction bearings,

translating screws, headstock gears, and some circulating systems.

Tribol MWO LS way oils are especially useful in applications where non-drip characteristics are desirable to reduce oil

loss or control "fly-off" from cams, eccentrics, conveyors, press shaft bearings, and in worn and older machines with

expanded clearances. Other important uses for Tribol MWO LS way oils include the lubrication of chains and wire ropes

where good adhesion and tackiness are needed, particularly where there is the potential for heavy condensation or waterwash.

Tribol MWO LS way oils are not intended for use in hydraulic systems or some circulating systems that serve both ways

and critical hydraulics.

Advantages

Tribol MWO LS way oils special formulation is most effective in the elimination of "stick-slip" and "chatter" on all

ways, vertical and horizontal.

The clear appearance and non-drip nature can reduce the soilage of production and housekeeping problems as

well.