产品中心
-
食品级润滑油-产品
-
煤矿液压支架用乳化油
-
食品级润滑油-行业
-
昆仑润滑油
-
长城润滑油
-
加德士润滑油
-
抑尘剂
-
嘉实多 Castrol
-
克鲁勃 KLUBER
-
福斯 FUCHS
-
汉高 Tangit
-
摩力大 MOLYDAL
-
道康宁 Dow Corning
-
摩力克 Molykote
-
IKV
-
壳牌 Shell
-
科梅林 Kommerlin
-
劳博抗 LUBCON
-
罗哥 ROCOL
-
阿吉普 AGIP
-
莱宝 LEYBONOL
-
道达尔 TOTAL
-
美孚 Mobil
-
全氟聚醚润滑油Fomblin
-
海湾 Gulf
-
好富顿 HOUGHTON
-
摩托瑞斯 MOTOREX
-
Kernite
-
航空壳牌 AeroShell
-
杜邦 DUPONT
-
CRC
-
TecnolubeSeal
-
协同 Kyodo
-
百力威 BEL-RAY
-
Neoval oil
-
FAG
-
摩特 MOTUL
联系热线
- 公 司:通辽市睿达商贸有限责任公司
- 吴经理:13384718677(中西部)
- 芳女士:13337042577(东部)
- 地 址:内蒙古呼和浩特市玉泉区华美汽配城院内(中部区)
- 内蒙古鄂尔多斯市东胜区华旌汽配城(西部区)
- 内蒙古通辽市华申时代写字楼B座6层(东部区)
Castrol Optileb GR 9830
Description
CASTROL OPTILEB™ GR 9830 (previously named Molub-Alloy™ Foodproof 9830) is a special high-temperature grease
formulated from a synthetic oil and solid lubricants, developed for the lubrication of rolling and sliding bearings. This
blend provides for excellent wear protection, increased service life and extended relubrication intervals at the same time.
The grease is excellently suited for high-temperature applications in the food and beverage industries where minimum
lubricant consumption, drip-free lubrication and physiological safety are required. It can also be used as a safety sliding
agent for oxygen installations.
Application
Especially suited for applications in baking and drying ovens in the food and canning industries.
Due to its low volatility, is also suited for vacuum applications, e.g. coating installations.
May be used in continuous service up to 250°C and be exposed to temperatures up to 280°C for short-time
applications.
Advantages
Aging resistance at high temperatures
Thermal and chemical stability
Resistant to most solvents, even chlorinated hydrocarbons, strong acids, alkalis and oxidizing agents, e.g.:
acetone, benzene, benzol, boron trifluoride, bromine, chlorine, chlorobenzene, cyclohexane, dioxan, natural gas,
ethylene acetate, fluorine, halogens, potassium hydroxide, methylene chloride, methyl formiate, sodium
hydroxide, perchloro-ethylene, petroleum ether, hydrochloric and sulphuric acid, tetrahydrofurane, toluol, 1.1.1.
trichlorethane, trichlorethylene, xylol
Excellent lubricating properties – as measured by standard laboratory tests and extensive field evaluations
Extended relubrication intervals without undue risk of lubricant starvation or increased lubricant consumption
Below 280°C the lubricant resists the thickening and hardening which is typical of mineral oil products in hightemperature
applications
Minimum consumption, economic application and clean operating conditions
Compatible with the following sealing materials: NBR, EPDM, NR, MWQ, PVMQ, PA, PE, PUR, PTFE
Physiologically safe; approval by LGA (Bavaria)